vs-80ebu02 www.vishay.com vishay semiconductors revision: 15-jun-11 1 document number: 93024 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultrafast soft recovery diode, 80 a fred pt ? features ? ultrafast recovery time ? 175 c max. operatin g junction temperature ? screw mounting only ? designed and qualified according to jedec-jesd47 ? compliant to rohs directive 2002/95/ec ? powertab ? package benefits ? reduced rfi and emi ? higher frequency operation ? reduced snubbing ? reduced parts count description/applications these diodes are optimized to reduce losses and emi/rfi in high frequency power conditioning systems. the softness of the recovery eliminates the need for a snubber in most applications. these devices are ideally suited for hf welding, po wer converters and other applications where switchin g losses are not significant portion of the total losses. product summary package powertab ? i f(av) 80 a v r 200 v v f at i f 1.13 v t rr (typ.) see recovery table t j max. 175 c diode variation single die cathode anode powertab ? absolute maximum ratings parameter symbol test conditions max. units cathode to anode voltage v r 200 v continuous forward current i f(av) t c = 112 c 80 a single pulse forward current i fsm t c = 25 c 800 maximum repetitive forward current i frm square wave, 20 khz 160 operating junction and storage temperatures t j , t stg - 55 to 175 c electrical specifications (t j = 25 c unless otherwise specified) parameter symbol test conditi ons min. typ. max. units breakdown voltage, blocking voltage v br , v r i r = 50 a 200 - - v forward voltage v f i f = 80 a - 0.98 1.13 i f = 80 a, t j = 175 c - 0.79 0.92 reverse leakage current i r v r = v r rated - - 50 a t j = 150 c, v r = v r rated - - 2 ma junction capacitance c t v r = 200 v - 89 - pf series inductance l s measured lead to lead 5 mm from package body - 3.5 - nh
vs-80ebu02 www.vishay.com vishay semiconductors revision: 15-jun-11 2 document number: 93024 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dynamic recovery characteristics (t j = 25 c unless otherwise specified) parameter symbol test condition s min. typ. max. units reverse recovery time t rr i f = 1.0 a, di f /dt = 200 a/s, v r = 30 v - - 35 ns t j = 25 c i f = 80 a v r = 160 v di f /dt = 200 a/s -32- t j = 125 c - 52 - peak recovery current i rrm t j = 25 c - 4.4 - a t j = 125 c - 8.8 - reverse recovery charge q rr t j = 25 c - 70 - nc t j = 125 c - 240 - thermal - mechanical specifications parameter symbol test conditions min. typ. max. units thermal resistance, junction to case r thjc - - 0.70 k/w thermal resistance, junction to heatsink r thcs mounting surface, flat, smooth and greased - 0.2 - weight - - 5.02 g -0.18- oz. mounting torque 1.2 (10) - 2.4 (20) n m (lbf in) marking device case style powertab? 80ebu02
vs-80ebu02 www.vishay.com vishay semiconductors revision: 15-jun-11 3 document number: 93024 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - maximum forward voltage drop characteristics fig. 2 - typical values of reverse current vs. reverse voltage fig. 3 - typical junc tion capacitance vs. reverse voltage fig. 4 - maximum thermal impedance z thjc characteristics forward voltage drop - v fm (v) instantaneous forward current - i f (a) 1 10 100 1000 0 0.5 1 1.5 2 2.5 t = 175?c t = 125?c t = 25?c j j j reverse voltage - v r (v) reverse current - i r (?) 0.001 0.01 0.1 1 10 100 1000 0 50 100 150 200 25?c t = 175?c j 125?c reverse voltage - v r (v) junction capacitance - c t (pf) 10 100 1000 10000 1101001000 t = 25?c j t 1 , rectangular pulse duration (seconds) thermal impedance z thjc (?/w) 0.01 0.1 1 0.00001 0.0001 0.001 0.01 0.1 1 10 single pulse (thermal resistance) d = 0.50 d = 0.20 d = 0.10 d = 0.05 d = 0.02 d = 0.01 2 t 1 t p dm notes: 1. duty factor d = t1/ t2 2. peak tj = pdm x zthjc + tc
vs-80ebu02 www.vishay.com vishay semiconductors revision: 15-jun-11 4 document number: 93024 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - maximum allowable case temperature vs. average forward current fig. 6 - forward power loss characteristics fig. 7 - typical reverse recovery time vs. di f /dt fig. 8 - typical stored charge vs. di f /dt note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = 80 % rated v r average forward current - i f (av) (a) allowable case temperature (?) 60 80 100 120 140 160 180 0 20406080100120 dc square wave (d = 0.50) 80% rated vr applied see note (1) average power loss ( watts ) average forward current - i f (av) (a) 0 20 40 60 80 100 120 02040608010012 0 dc rms limit d = 0.01 d = 0.02 d = 0.05 d = 0.10 d = 0.20 d = 0.50 trr ( ns ) di f /dt (a/? ) 10 20 30 40 50 60 70 0 0 0 1 0 0 1 if = 160a if = 80a if = 40a vr = 160v tj = 125?c tj = 25?c qrr ( nc ) di f /dt (a/? ) 0 200 400 600 800 1000 1200 0 0 0 1 0 0 1 vr = 160v tj = 125?c tj = 25?c if = 160a if = 80a if = 40a
vs-80ebu02 www.vishay.com vishay semiconductors revision: 15-jun-11 5 document number: 93024 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 9 - reverse recovery parameter test circuit fig. 10 - reverse recovery waveform and definitions irfp250 d.u.t. l = 70 h v r = 200 v 0.01 g d s di f /dt adju s t q rr 0.5 i rrm di (rec)m /dt 0.75 i rrm i rrm t rr t b t a i f di f /dt 0 (1) (2) (3) (4) (5) (1) di f /dt - rate of change of current through zero cro ss ing (2) i rrm - peak rever s e recovery current (3) t rr - rever s e recovery time mea s ured from zero cro ss ing point of negative going i f to point where a line pa ss ing through 0.75 i rrm and 0.50 i rrm extrapolated to zero current. (4) q rr - area under curve dened by t rr and i rrm t rr x i rrm 2 q rr = (5) di (rec)m /dt - peak rate of change of current during t b portion of t rr
vs-80ebu02 www.vishay.com vishay semiconductors revision: 15-jun-11 6 document number: 93024 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table 2 - current rating (80 = 80 a) 1 - vishay semiconductors product 3 - single diode 4 - powertab ? (ultrafast/hyperfast only) 5 - ultrafast recovery 6 - voltage rating (02 = 200 v) device code 5 6 1 3 2 4 80 vs- e b u 02 links to related documents dimensions www.vishay.com/doc?95240 part marking information www.vishay.com/doc?95370 application note www.vishay.com/doc?95179
outline dimensions www.vishay.com vishay semiconductors revision: 03-aug-11 1 document number: 95240 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 powertab ? dimensions in millimeters (inches) 15.90 (0.62) 15.60 (0.61) 4.20 (0.16) 4.00 (0.15) 4.95 (0.19) 4.75 (0.18) 5.20 (0.20) 4.95 (0.19) 18.25 (0.71) 18.00 (0.70) 27.65 (1.08) 27.25 (1.07) 39.8 (1.56) 39.6 (1.55) 12.40 (0.48) 12.10 (0.47) 8.45 (0.33) 8.20 (0.32) 15.60 (0.61) 14.80 (0.58) 5.45 ref. (0.21 ref.) 1.30 (0.05) 1.10 (0.04) 3.09 (0.12) 3.00 (0.11) 1.35 (0.05) 1.20 (0.04) 0.60 (0.02) 0.40 (0.01) 12.20 (0.48) 12.00 (0.47) ? 4.20 (? 0.16) ? 4.00 (? 0.15) ? 4.20 (? 0.16) ? 4.00 (? 0.15) lead 1 lead 2 lead assignments lead 1 = cathode lead 2 = anode
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
